Stage 1 Recreational Snowmobile Shock Absorbers
The Stage 1 is our most accessible entry-level shock model designed to upgrade your sled’s suspension beyond the capabilities of the stock shocks
If you believe that your stock shocks are “good enough”, you probably never tried a set of properly calibrated aftermarket shocks. It is amazing how much difference our Stage 1 can make on your snowmobile. Even if you just cruise along at moderate speed, these shocks will erase the bumps and get rid of the vibration so you can ride comfortably and in perfect control. However, the more you press the throttle, the more your Stage 1 shocks will come alive and make a night-and-day difference to the handling and performance of your snowmobile.
STAGE 1 // Benefits
- To upgrade from or replace stock OEM shocks
- Our most accessible entry-level model
- Simple to use, bolt-on upgrade for improved handling, stability and comfort
- Sled-specific tuning, calibrated for your personal weight and type of riding
- Same quality components and careful craftsmanship as our higher-end models
STAGE 1 // Available configurations
- Front ski shocks, 36mm, coilover, sold as a pair
- Center track shock, 36mm, coilover or non-coilover, sold as a unit
- Rear track shock, 36mm, coilover or non-coilover, sold as a unit
- Configuration varies according to vehicle model and year
STAGE 1 // Adjustment Features
THREADED SPRING PRELOAD
Available on all front ski shocks and coilover models at the center or rear position. Lets the rider fine-tune the initial force applied on the springs and precisely balance the weight distribution across the front and rear of the sled while setting up the ride height (sag) and to lower or raise the sled to adapt to various situations or to suit your personal preference.
To use, turn the preload adjustment ring clockwise (from top of the shock) to increase preload and raise the vehicle or turn counter-clockwise to reduce preload and lower the vehicle.
STAGE 1 // Technical Features
- Components that are precision-machined from aeronautical grade billet aluminum
- Sleek, lightweight reservoir with recessed cap to better protect the nitrogen valve
- Ultra-light spring design with bigger outside diameter and less coil turns, providing important weight reduction while maintaing the reliability and intuitive ride-height adjustability of coil springs vs. air springs
- Reduced weight and friction = less stiction and lower operating temperature = more resistance to fading
- Crossover spacers design that reduces the accumulation of snow and ice, therefore reducing wear on the body
- Optional lightweight composite shock protectors to provide further protection against roost and other debris (for front ski shocks only)
- Neutral look and colors that blends well with any sled model and livery
- Hard-anodized aluminium internal floating piston for low operating temperature
- Aluminum body that dramatically reduces overal weight and better dissipates heat generated during operation
- Hard-anodized to very tight tolerances to improve durability and further reduce friction
- Special thread design on the aluminum body that provides more surface and less friction to making preload adjustments much easier
- Provides a smooth surface that helps reduce internal friction inside the body
- More durable finish than regular sulphuric anodization generally used on lower-end products
- Hard chrome-plated shafts
- Seal head design is composed of external dust wiper, high-pressure step-seal and o-ring
- 46mm shocks also feature a double dust wiper to further prevent debris for entering the shock
- Low-friction o-ring material is certified resistant to greater temperature changes
- High material memory that helps maintain sealing properties in harsh conditions
- All sealing components are premium quality, carefully selected for their optimal balance of performance and durability
- Fully synthetic proprietary blend
- Ultra-low friction light viscosity grade that maintains its properties even in extremely cold temperatures
- Ultra-resistant to high temperature
- Extended usable life
- Seal head design is composed of external ice-breaking seal, high-pressure step-seal and o-ring
- Low-friction o-ring material is certified resistant to greater temperature changes
- High material memory that helps maintain sealing properties in harsh conditions
- All sealing components are premium quality, carefully selected for their optimal balance of performance and durability
User Testimonials
Elka’s Unique Benefits
Production Lead Time
All our products are built-to-order specifically for each customer.
Our regular production lead time is approximately 5 to 10 business days depending on the current volume of orders.
The estimated delivery date will be confirmed to you when your order is processed with us, based on the shipping mode you will have selected.